ART's 341 Dual Channel 15 band 2/3
Octave
Graphic
Equalizer features: constant
Q circuitry with a 3% center
Frequency accuracy, 20mm center
Detent sliders, selectable boost/cut range of 6dB or 12dB, active
Balanced and
Unbalanced input and output connect-ions, variable input
Level control, clip
Level indicators,
Ground Lift switch, internal power supply and selectable line
Voltage switch. A range control switch is provided allowing you to set the maximum boost or cut for each band of
Equalization to either 6dB or 12dB. Each
Channel has its own bypass switch with
LED indicator. The rugged, all-steel constructed chassis occupies
1U
Rack Space and is intended for installation in standard 19" equipment
Racks.
Multiple input and output configurations are provided for ease of use and incorporate paralleled connections. The
XLR and 1/4"
] cssheader="[boxoverheader]" cssbody="[boxoverbody]"" class="dictionary">TRS connectors use active
Balanced, low
Noise circuitry.
XLR connections are: Pin 1 =
Ground, Pin 2 = Hot (+), and Pin 3 = Cold (-). The 1/4"
] cssheader="[boxoverheader]" cssbody="[boxoverbody]"" class="dictionary">TRS connections are: Tip = Hot (+), Ring =Cold (-), and Sleeve =
Ground. Both the
XLR and 1/4" connectors may be used in an
Unbalanced configuration. The
RCA jacks are
Unbalanced. The 341 is designed to work with a variety of signal levels. The input
Level control covers a wide range and can easily accommodate -10 and +4 signal levels. A clip
LED will light when a signal
Level of 5dB before
Clipping occurs.
The 341 may be used in a variety of applications such as live
Sound, recording studios, instrument
Racks as well as any conventional fixed installation environment. Use the 341
Equalizer wherever modification of the
Frequency contour of a
Sound is needed. The 341
Graphic
Equalizer is a powerful tool for solving a number of
Audio problems and creating interesting
Sound textures. Patch the
EQ between your
Mixing
Console and power
Amps to allow you to alter the overall mix to better match your environment. Use the 341 between your monitor
Mixer and monitor power
Amps to aid in the removal of
Feedback inducing frequencies. Patch into a
Channel
Insert to
EQ one
Channel or
Track individually. Run your instrument directly into the
Equalizer to enhance its
Sound before reaching a
Power
Amplifier or instrument
Amplifier. Patch the 341 into the effects loop of an instrument
Amplifier or between a
Preamp and
Power
Amp to have precise control over the complete
Sound.
The 341 Dual 15 Band
EQ has the features and performance you need for any of your
Audio applications requiring
Equalization.
ART EQ-341 Specifications:
- Channel Separation: >50dB
- Controls: Power On/Off Switch; L/R
Filter Range Switch; L/R Bypass Switch; L/R Level Control; Ground Lift Switch
- Dimensions: 1.75"H x 19"W x 8.5"D
- Filter Type: Constant Q - 3% center accuracy
- Frequency Bands: 2x15, 2/3 Octave, ISO spacing
- Frequency Response: 20Hz to 20kHz, +0.5dB
- Indicators: 6dB/12dB Range LEDs; Bypass and Clip LEDs
- Input Impedance: 20k Ohms (bal), 15k Ohms (unbal)
- Input/Output Connections: Active Balanced XLR and 1/4" ] cssheader="[boxoverheader]" cssbody="[boxoverbody]"" class="dictionary">TRS {XLR pin 2/ 1/4" tip = Hot (+)} Unbalanced RCA
- Maximum Input Level: +22dBm
- Maximum Output Level: +18dBm (bal), +22dBm (unbal)
- Output Impedance: <150 Ohms (Typ)
- Power: (Switchable) 95-130VAC, 50/60Hz
- Power Consumption: 12 Watts
- Range: +/-6dB or +/-12dB selectable
- Signal to Noise Ratio: -94dB
- Slider Travel: 20mm w/ positive center Detent
- Total Harmonic Distortion: 0.01%
- Weight: 4.5lbs. (2.5kg)